1-29
Description
Use the display dhcp server tree command to display information about address pool tree.
Examples
# Display the information about address pool tree.
<Sysname> display dhcp server tree all
Global pool:
Pool name: test123
network 10.0.0.0 mask 255.0.0.0
Child node:test1234
option 30 hex AA BB
expired 1 0 0
Pool name: test1234
network 10.1.1.0 mask 255.255.255.0
Parent node:test123
option 30 hex AA BB
expired 1 0 0
Interface pool:
Pool name: Vlan-interface2
network 192.168.2.0 mask 255.255.255.0
gateway-list 192.168.2.1
expired 1 0 0
Table 1-5 Description on the fields of the display dhcp server tree command
Field Description
Global pool Information about global address pools
Interface pool Information about interface address pools
Pool name Address pool name
network Assignable IP address range
Child node
The child node address pool of this node.
This field can display the information about the following types of
node:
Child node: Displays the information about an address pool that is a
child of the current address pool.
Parent node: Displays the information about the address pool that is
the parent of the current address pool.
Sibling node: Displays the information about the next sibling address
pool of the current address pool. (The order of sibling address pools
are determined by the time when they are configured.)
PrevSibling node: Displays the information about the previous sibling
address pool of the current address pool.
option Customized DHCP options
To Next Page
Loading...
Need help?
General