EasyManuals Logo

H3C S3600 Series Command Manual

H3C S3600 Series
1277 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1076 background imageLoading...
Page #1076 background image
1-15
info-center switch-on
Syntax
info-center switch-on { unit unit-id | master | all } [ debugging | logging | trapping ]*
undo info-center switch-on { unit unit-id | master | all } [ debugging | logging | trapping ]*
View
System view
Parameters
unit unit-id: Specifies a switch in the fabric by its unit ID.
master: Controls the switch that serves as master in the fabric.
all: Controls all switches within the fabric.
debugging: Enables the debugging information output.
logging: Enables the log information output.
trapping: Enables the trap information output.
Description
Use the info-center switch-on command to enable system information output for a specified switch or
all switches in a fabric.
Use the undo info-center switch-on command to disable the corresponding information output for a
switch.
By default, debugging information output is enabled and log and trap information output is disabled for
the master switch in the fabric. Debugging, log and trap information output for other switches in the
fabric is disabled.
z After the switches supporting IRF form a fabric, the log, debugging and trap information of each
switch in the fabric can be synchronized. Each switch sends its own information to other switches in
the fabric and receives information sent by other switches at the same time to update the
information on itself. In this way, the switches keep the synchronization of log, debugging and trap
information in the whole fabric.
z If you disable information output for a switch, the switch will no longer send information to other
switches, but still receive information sent by other switches.
Examples
# Enable trap information output for the switch whose Unit ID is 2 in the fabric.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] info-center switch-on unit 2 trapping

Table of Contents

Other manuals for H3C S3600 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S3600 Series and is the answer not in the manual?

H3C S3600 Series Specifications

General IconGeneral
BrandH3C
ModelS3600 Series
CategorySwitch
LanguageEnglish

Related product manuals