H3C S3600 Series

2-2
Examples
# Test whether destination 2001::1 is accessible.
<Sysname> ping ipv6 2001::1
PING 2001::1 : 56 data bytes, press CTRL_C to break
Reply from 2001::1
bytes=56 Sequence=1 hop limit=64 time = 20 ms
Reply from 2001::1
bytes=56 Sequence=2 hop limit=64 time = 0 ms
Reply from 2001::1
bytes=56 Sequence=3 hop limit=64 time = 0 ms
Reply from 2001::1
bytes=56 Sequence=4 hop limit=64 time = 0 ms
Reply from 2001::1
bytes=56 Sequence=5 hop limit=64 time = 0 ms
--- 2001::1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 0/4/20 ms
Table 2-1 Description on the fields of the ping ipv6 command
Field Description
PING 2001::1 Verify whether the device at 2001::1 is reachable
56 data bytes Number of bytes in the ICMPv6 echo request
press CTRL_C to break
Press Ctrl + C to terminate the ping operation after the ping ipv6
command is executed.
Reply from 2001::1
An ICMPv6 reply message is received from the device at 2001::1.
If no ICMPv6 reply is received within the timeout time, “Request time
out” is displayed.
bytes= Number of data bytes in the ICMPv6 reply message
Sequence= Packet sequence number
hop limit=
TTL in the ICMP reply message, similar to the TTL in the output
information of IPv4 ping operations.
time = Round-trip response time
--- 2001::1 ping statistics --- Statistics obtained by pinging the IPv6 address 2001::1
5 packet(s) transmitted Number of sent packets
5 packet(s) received Number of received packets
0.00% packet loss Packet loss percentage
round-trip min/avg/max =
0/4/20 ms
Minimum/average/maximum response time, in milliseconds.