H3C S3600 Series Command Manual

1-6
Protection Type :None
MSTP BPDU format :Config=auto / Active=legacy
Port Config
Digest Snooping :disabled
Num of Vlans Mapped :1
PortTimes :Hello 2s MaxAge 20s FwDly 15s MsgAge 0s RemHop 20
BPDU Sent :0
TCN: 0, Config: 0, RST: 0, MST: 0
BPDU Received :0
TCN: 0, Config: 0, RST: 0, MST: 0
Table 1-3 display stp command output description
Field Description
CIST Bridge CIST bridge ID
Bridge Times
Major parameters for the bridge:
z Hello: Hello timer
z MaxAge: Max Age timer
z FwDly: Forward delay timer
z MaxHop: Max hops within the MST region
CIST Root/ERPC CIST root and external path cost
CIST RegRoot/IRPC CIST regional root and internal path cost
CIST RootPortId CIST root port ID
BPDU-Protection Indicates whether BPDU protection is enabled globally.
TC-Protection*** / Threshold=**
Indicates whether TC-BPDU attack guard function is enabled
globally, and the maximum times that a switch can remove the
MAC address table and ARP entries within each 10 seconds.
Bridge Config
Digest Snooping
Indicates whether Digest Snooping is enabled globally on the
bridge.
TC or TCN received Number of received TC/TCN packets
Time since last TC Time of the latest topology change
Port Protocol Indicates whether STP is enabled on the port
Port Role
Port role, which can be Alternate, Backup, Root, Designated,
Master, or Disabled
Port Priority Port priority
Port Cost(Legacy)
Path cost of the port. The field in the bracket indicates the
standard used for port path cost calculation, which can be
legacy, dot1d-1998, or dot1t. Config indicates the configured
value, and Active indicates the actual value.
Desg. Bridge/Port
Designated bridge ID and port ID of the port
The port ID displayed is insignificant for a port which does not
support port priority.
Port Edged
Indicates whether the port is an edge port. Config indicates the
configured value, and Active indicates the actual value.
Point-to-point
Indicates whether the port is connected to a point-to-point link.
Config indicates the configured value, and Active indicates the
actual value.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English