1-4
webcache redirect-vlan
Syntax
webcache redirect-vlan vlan-id
undo webcache redirect-vlan [ vlan-id ]
View
System view
Parameters
vlan-id: ID of the VLAN whose HTTP traffic is to be redirected.
Description
Use the webcache redirect-vlan command to configure a VLAN as a redirected VLAN, that is, specify
to redirect the HTTP traffic of the VLAN to the Web cache server.
Use the undo webcache redirect-vlan command to remove one or all redirected VLANs.
By default, no HTTP traffic is redirected to the Web cache server.
Note that:
z Before configuring a VLAN as a redirected VLAN, you need to create the VLAN interface for the
VLAN.
z You can configure multiple redirected VLANs by executing the webcache redirect-vlan command
repeatedly. You can configure up to 8 redirected VLANs.
z If you do not specify the vlan-id argument when executing the undo webcache redirect-vlan
command, the command will remove all the configured redirected VLANs.
z The VLAN interface of a redirected VLAN must be up for the Web cache redirection function to take
effect.
z The switch does not support configuring the VLAN to which the Web cache server belongs as a
redirected VLAN.
Examples
# Configure VLAN 40 as a redirected VLAN to redirect the HTTP traffic of VLAN 40 to the Web cache
server.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] webcache redirect-vlan 40
To Next Page
Loading...
Need help?
General