H3C S3600 Series Command Manual

1-28
View
User view
Parameters
None
Description
Use the ftp cluster command to connect to the shared FTP server of the cluster and enter FTP Client
view through the management device.
You can use the ftp-server command on the management device to configure the shared FTP server of
the cluster, which is used for software version update and configuration file backup of the cluster
members.
Related commands: ftp-server.
For how to access other FTP servers using the ftp command, refer to the FTP-SFTP-TFTP part of the
manual.
Examples
# Connect to the FTP server shared by the cluster.
<123_1.Sysname> ftp cluster
Trying ...
Press CTRL+K to abort
Connected.
220 FTP service ready.
User(none):hello
331 Password required for hello.
Password:
230 User logged in.
ftp-server
Syntax
ftp-server ip-address
undo ftp-server
View
Cluster view
Parameters
ip-address: IP address of the FTP server to be configured for the cluster.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English