H3C S3600 Series

1-9
display ssh2 source-ip
Syntax
display ssh2 source-ip
View
Any view
Parameters
None
Description
Use the display ssh2 source-ip command to display the current source IP address or the IP address
of the source interface specified for the SSH client. If neither source IP address nor source interface is
specified, the command displays 0.0.0.0.
Related commands: ssh2 source-ip.
Examples
# Display the current source IP address specified for the SSH Client.
<Sysname> display ssh2 source-ip
The source IP you specified is 192.168.0.1
display ssh-server source-ip
Syntax
display ssh-server source-ip
View
Any view
Parameters
None
Description
Use the display ssh-server source-ip command to display the current source IP address or the IP
address of the source interface specified for the SSH server. If neither source IP address nor source
interface is specified, the command displays 0.0.0.0.
Related commands: ssh-server source-ip.
Examples
# Display the current source IP address specified for the SSH Server.
<Sysname> display ssh-server source-ip
The source IP you specified is 192.168.1.1