Configuring the Internal Baseband Source
R&S
®
SMW200A
334User Manual 1175.6632.02 ─ 16
This section explains the settings, necessary to create and adjust the contents of
the multi-segment file.
Settings:
Multi Segment Table, Append/Delete/Shift Seg..........................................................334
Blank Segment............................................................................................................334
Multi Segment Table, Append/Delete/Shift Seg.
The table lists the individual waveforms (segments) of the selected multi-segment
waveform. The information about the segments is retrieved from the tags of the corre-
sponding waveform files.
Table 4-22: GUI Elements in the Multi-Segment Table
Function Description
"Segment#" Indication of segment index. Within the manual and remote control configuration,
this segment index indicates the segment explicitly.
Tip: Use the segment index for example to define the subsequent sequence to be
output in Next Segment Mode "Next Segment" or "Next Segment Seamless".
"Waveform" Indication of the waveform file name of the segment.
"Clock Rate" Indication of the clock rate of the selected waveform.
"Samples" Indication of the number of samples in the segment.
"Period" Indication of the segment duration.
"Path" Indication of the location of the waveform file used for the corresponding segment.
"Comment" Indication of the possible comment contained in the waveform.
"Info" Opens a dialog with detailed information about the currently selected waveform.
"Append"
Opens the standard "File Select" dialog for navigation to and selec-
tion of the waveform file to be added on the end of the existing list.
Only non-multi segment waveforms can be loaded.
"Delete"
Removes the selected entry from the table. The waveform file itself is
however not deleted.
"Shift Seg.# Up/Down"
Rearranges the segments, i.e. moves the selected segment up and
down.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:SEGMent:CATalog?
on page 942
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:SEGMent:APPend
on page 942
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:DELete on page 941
Blank Segment
Comprises the settings of a blank segment. A blank segment is a zero signal with
defined clock rate and number of samples.
Generating Multi-Segment Waveform Files
To Next Page
Loading...
