Configuring the Internal Baseband Source
R&S
®
SMW200A
341User Manual 1175.6632.02 ─ 16
"Segment#"
Indicates the segment index.
The sequencing list file carries information only about the segment
index, the corresponding file names are retrieved form the assigned
multi-segment waveform file.
"Waveform"
Indicates the waveform file mapped to the corresponding segment.
The file name is retrieved form the assigned multi-segment waveform
file.
Available are only waveform files from the pool of segments of the
selected multi-segment waveform file.
"Repetition Cycles"
Sets the number of times the selected segment is cyclically repeated
before the next segment in the sequence is processed.
"Info"
Opens a dialog with detailed information about the currently selected
waveform.
Remote command:
See "Append" on page 341
Next ← Sequencing Play List
Determines the action after completing the current one, like for instance which seg-
ment is processed after the processing of the current one is finished.
"Next Id#"
The next active segment in the play list is processed.
"Blank"
After the processing of the current segment is completed, the signal
output is stopped until a signal restart like a retrigger signal is
received.
A restart signal causes a complete restart of the sequencing play list.
"Endless"
The current segment is replayed until a signal restart like a retrigger
signal is received and the complete sequencing play list is restarted.
Only active segments are considered.
"Goto Id#"
Determines the row number of the segment to be processed next.
This feature is limited to the first 32 rows.
Append ← Sequencing Play List
Inserts a new row at the end of the sequencing play list table.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:SEQuence:SELect on page 937
[:SOURce<hw>]:BB:ARBitrary:WSEGment:SEQuence:APPend on page 938
Delete ← Sequencing Play List
Deletes the selected row.
Shift Id# Up/Down ← Sequencing Play List
Rearranges the rows, i.e. moves the selected row up and down.
Sequencing Graphic
Displays the play list graph according to the current configuration.
The graph shows the segment sequence, the segment number, and the number of
times, the segment is repeated; considered are only the active segments.
Generating Multi-Segment Waveform Files
To Next Page
Loading...
