Remote Control Commands
R&S
®
SMW200A
938User Manual 1175.6632.02 ─ 16
[:SOURce<hw>]:BB:ARBitrary:WSEGment:SEQuence:APPend <State>,
<Segment>, <Count>, <Next>
Appends a new segment to the selected sequencing play list.
Setting parameters:
<State> ON | OFF
Activates/deactivates the appended segment
*RST: ON
<Segment> integer
Indicates the number of the segment as in the multi-segment
waveform file
Range: 0 to SegmentCount - 1
<Count> integer
Defines how many times this segment is repeated
Range: 1 to 1048575
<Next> NEXT | BLANk | ENDLess | SEG0 | SEG1 | ... | SEG31 |
0...maxSegment
Determines the action after completing the current segment, like
for instance which segment is processed after the processing of
the current one is finished.
Example: See Example "Using the ARB sequencer" on page 925
Usage: Setting only
Manual operation: See "Append" on page 341
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CREate <FilenameInput>
Creates a multi-segment waveform (*.wv) using the current settings of the specified
configuration file (*.inf_mswv).
Setting parameters:
<FilenameInput> Absolute file path, file name of the configuration file and file
extension (*.inf_mswv)
Example: See Example "Creating a multi-segment waveform" on page 922
Usage: Setting only
Manual operation: See "Save List/Save List As..." on page 332
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CLOad <FilenameInput>
Creates a multi-segment waveform using the current entries of the specified configura-
tion file (*.inf_mswv).
The ARB generator is activated, the new multi-segment waveform (*.wv) is loaded
and the first segment is output in accordance to the trigger settings.
SOURce Subsystem
To Next Page
Loading...
