Rohde & Schwarz SMW200A - Page 868

Remote Control Commands
R&S
®
SMW200A
853User Manual 1175.6632.02 ─ 16
Per default, the instrument stores user-defined files in the /var/user/ directory. Use
the command MMEM:CDIRectory to change the default directory to the currently used
one.
Only files with extension *.iec are listed.
Example: See Example "Connecting and configuring external instrument
(advanced configuration)" on page 826
Usage: Query only
Manual operation: See "Initialization Sequence" on page 159
:SCONfiguration:EXTernal:CODer<ch>:REMote:INITialization:USER:FILE
<Filename>
:SCONfiguration:EXTernal:FADer<ch>:REMote:INITialization:USER:FILE
<Filename>
:SCONfiguration:EXTernal:BBMM<ch>:REMote:INITialization:USER:FILE
<Filename>
:SCONfiguration:EXTernal:IQOutput<ch>:REMote:INITialization:USER:FILE
<Filename>
Loads the selected user-defined initialization file (extension *.iec).
Per default, the instrument stores user-defined files in the /var/user/ directory. Use
the command MMEM:CDIRectory to change the default directory to the currently used
one.
Setting parameters:
<Filename> string
For files stored in the default directory, only the file name is
required.
Example: See Example "Connecting and configuring external instrument
(advanced configuration)" on page 826
Usage: Setting only
Manual operation: See "Initialization Sequence" on page 159
:SCONfiguration:EXTernal:CODer<ch>:REMote:INITialization:PREDefined:FILE
<Filename>
:SCONfiguration:EXTernal:FADer<ch>:REMote:INITialization:PREDefined:FILE
<Filename>
:SCONfiguration:EXTernal:BBMM<ch>:REMote:INITialization:PREDefined:FILE
<Filename>
:SCONfiguration:EXTernal:IQOutput<ch>:REMote:INITialization:PREDefined:
FILE <Filename>
Loads the selected predefined initialization file (extension *.iec).
SCONfiguration Subsystem