YASKAWA DX100 - Editing Jobs

3-64
155507-1CD
RE-CSO-A037
DX100
3 Teaching
3.7 Editing Jobs
3.7 Editing Jobs
The following five operations are to edit jobs.
Copy :Copies a specified range to the buffer.
Cut :Copies a specified range from a job to the buffer, and deletes
it in a job.
Paste :Inserts the contents of the buffer into a job.
Reverse Paste :Reverses the order of the contents of the buffer, and inserts
them into a job. 
(Refer to the following figure.)
Base Reverse
Paste
:Reverses the order of the contents of the buffer and adjusts
the to-and-from speeds same, and inserts them into a job. 
(Refer to the following figure.)
Execute Base Reverse Paste
V=100
V=50
V=30
V=70
V=80
V=30
V=80
V=50
V=100
V=??
The speed and interpolation are
different going and returning.
V=100
V=50
V=30
V=70
V=80
V=30
V=80
V=50
The speed and interpolation are
the same going and returning.
V=70
:
MOVL V=100 ;Move to at V=100
MOVL V=50 ;Move to t V= 50
MOVL V=80 ;Move to at V=80
MOVL V=30 ;Move to t V=30
MOVL V=70 ;Move to at V=30
:
:
MOVL V=100 ;Move to at V=100
MOVL V=50 ;Move to t V= 50
MOVL V=80 ;Move to at V=80
MOVL V=30 ;Move to at V=30
MOVL V=70 ;Move to t V=70
MOVL V=30 ;Move to at V=30
MOVL V=80
;Move to at V=80
MOVL V=50 ;Move to at V= 50
MOVL V=100 ;Move to at V=100
:
MOVL V=100
MOVL V=50
MOVL V=80
MOVL V=30
MOVL V=70
Excute Reverse Paste
MOVL V=70 ;Move to at V=70
MOVL V=30
;Move to at V=30
MOVL V=80 ;Move to at V= 80
MOVL V=50 ;Move to at V=50
:
;Move to at V=100
;Move to t V= 50
;Move to
at V=80
;Move to at V=30
;Move to t V=70
V=100
V=50
V=80
V=30
V=70
1
1
1
2
2
2
3
3
4
4
4
5
5
5
:
147 of 554