YASKAWA DX100 - Copying Jobs on the JOB LIST Window

5-3
155507-1CD
RE-CSO-A037
DX100
5 Editing Jobs
5.1 Copying Jobs
5. Press [ENTER].
– The confirmation dialog box appears.
– If “YES” is selected, the job is copied and the new job appears.
– If “NO” is selected, the job copy is not executed, and the process is
canceled.
5.1.0.2 Copying Jobs on the JOB LIST Window
On the JOB LIST window, select the copy source job from the registered
jobs and specify the copy destination directory.
1. Select {JOB}  {SELECT JOB} under the main menu.
– The JOB LIST window appears.
2. Move the cursor to the copy source job.
3. Select {JOB}  {COPY JOB} under the pull-down menu.
SUPPLE-
MENT
See section 1.2.6 “Character Input Operation” on page 1-18
for information on letter input operations.
229 of 554