YASKAWA DX100 - Correcting a Job

9-14
155507-1CD
RE-CSO-A037
DX100
9 General Purpose Application
9.1 Simplified Teaching and Playback
9.1.1.4 Correcting a Job
 Before Correcting a Job
Confirm the manipulator’s motion in each step. If any position modification
or adding or deleting of steps is necessary, display the job content first
with the following procedure.
CAUTION
• After the job is corrected, be sure to confirm the path.
1. Select {JOB} under the main menu and {JOB}
under the sub menu to display the JOB
CONTENT window.
MAIN
MENU
MAIN
MENU
SELECT
SELECT
503 of 554