7 External Memory Devices
7.1 Memory Devices
7-2
155507-1CD
RE-CSO-A037
DX100
7.1.1 Compact Flash (CF Cards)
The programming pendant is equipped with CF card slot. Use the FAT16
or FAT32 formatted Compact Flash.
7.1.1.1 Recommended Compact Flash Cards
Refer to section 9.1.2 “Device” in “DX100 INSTRUCTIONS
(RE-CTO-A215)” for the recommended products used for external
memory of DX100. Model numbers are subject to be updated due to
termination of product and new addition. Contact Yaskawa representative
when necessary.
7.1.1.2 Notes on handling Compact Flash
• Do not drop or bend exerting any shock or strong force to the
Compact Flash.
• Keep away from water, oil, organic solvent, dust, and dirt.
• Do not use or keep the Compact Flash in places where strong static
electricity or electronic noise may occur.
• Do not insert or remove the Compact Flash or turn OFF the power
when accessing the Compact Flash (writing-in or reading-out the
Compact Flash data).
• To protect the data, back up the data regularly on other media.
Damages or loss of data due to operation errors or accidents can be
minimized.
*Compact Flash has a limited life span.
The life span differs depending on products or status of use. However,
normal use of Compact Flash as an external memory device for the
DX100 does not adversely affect the Compact Flash. For details, refer to
instruction manuals for each medium.
To Next Page
Loading...
Need help?
General
