7 External Memory Devices
7.1 Memory Devices
7-4
155507-1CD
RE-CSO-A037
DX100
7.1.2 USB Memory Stick
The programming pendant is equipped with a USB connector. Use the
FAT16 or FAT32 formatted USB memory stick.
7.1.2.1 Recommended USB Memory Stick
Refer to section 9.1.2 “Device” in “DX100 INSTRUCTIONS (RE-CTO-
A215)” for the recommended products used for external memory of
DX100. Model numbers are subject to be updated due to termination of
product and new addition. Contact Yaskawa representative when
necessary.
7.1.2.2 Notes on handling USB Memory Stick
• Do not drop or bend exerting any shock or strong force to the
Compact Flash.
• Keep away from water, oil, organic solvent, dust, and dirt.
• Do not use or keep the Compact Flash in places where strong static
electricity or electronic noise may occur.
• Do not insert or remove the Compact Flash or turn OFF the power
when accessing the Compact Flash (writing-in or reading-out the
Compact Flash data).
• To protect the data, back up the data regularly on other media.
Damages or loss of data due to operation errors or accidents can be
minimized.
*USB memory stick has a limited life span.
The life span differs depending on products or status of use. However,
normal use of USB memory stick as an external memory device for the
DX100 does not adversely affect the USB memory stick. For details, refer
to instruction manuals for each medium.
To Next Page
Loading...
Need help?
General
