YASKAWA DX100 - Operate Enable Setting

6 Convenient Functions
6.9 Parameter Setting Function
6-102
155507-1CD
RE-CSO-A037
DX100
6.9.4 Operate Enable Setting
Select {SETUP}  {OPERATE ENABLE SETTING} to display the
following window.
• EXTERNAL START (S2C219)
Refer to section 8.3.0.19 “S2C219: EXTERNAL START” on page 8-
17.
• PP START (S2C220)
Refer to section 8.3.0.20 “S2C220: PROGRAMMING PENDANT
START” on page 8-17.
• EXTERNAL MODE SWITCH (S2C225)
Refer to section 8.3.0.24 “S2C225: EXTERNAL MODE SWITCH” on
page 8-18.
Setting Parameter Status
Permit 0
Prohibit 1
Setting Parameter Status
Permit 0
Prohibit 1
Setting Parameter Status
Permit 0
Prohibit 1
342 of 554