YASKAWA DX100 - Deleting Jobs on the JOB LIST Window

5 Editing Jobs
5.2 Deleting Jobs
5-6
155507-1CD
RE-CSO-A037
DX100
5.2.0.2 Deleting Jobs on the JOB LIST Window
On the JOB LIST window, select the job to be deleted from the list of the
registered jobs.
1. Select {JOB}  {SELECT JOB} under the main menu.
– The JOB LIST window appears.
2. Move the cursor to the job to be deleted.
3. Select {JOB}  {DELETE JOB} under the pull-down menu.
4. Press “YES”.
– The confirmation dialog box appears.
– When “YES” is selected, the selected job is deleted. When deletion
is completed, the JOB LIST window appears.
– If “NO” or [CANCEL] is selected, the job deletion is canceled and the
JOB LIST window appears.
SUPPLE-
MENT
To select all the registered jobs at a time, select {EDIT} from
the menu and then select “SELECT ALL”.
232 of 554