YASKAWA DX100 - Enabling Reserved Start

4-24
155507-1CD
RE-CSO-A037
DX100
4 Playback
4.5 Playback with Reserved Start
4.5.1.1 Enabling Reserved Start
The start button on the station is operative when the reserved start
function is enabled, and the following start operations are disabled.
• [START] on the programming pendant
• Start operation from external input signal (system input)
1. Select {SETUP} under the main menu.
2. Select {OPERATE COND}.
– The OPERATING CONDITION window appears.
– The screen is scrolled up/down by the cursor key when it locates at
the top/bottom of the items.
3. Select “RESERVED START”.
– Each time [SELECT] is pressed, “PERMIT” and “PROHIBIT”
alternate. Select “PERMIT”.
NOTE
The OPERATING CONDITION window is shown only when
the security mode is management mode.
213 of 554