3 Teaching
3.7 Editing Jobs
3-69
155507-1CD
RE-CSO-A037
DX100
3.7.5 Reverse Pasting
Before pasting, the range to be pasted has to be stored in the buffer.
1. Move the cursor to the line immediately before the desired position in
the JOB CONTENT window.
2. Select {EDIT} under the menu.
– The pull-down menu appears.
3. Select {REVERSE PASTE}.
– The confirmation dialog box appears.
– When “YES” is selected, the contents of the buffer are reverse
pasted to the job.
– When “NO” is selected, the reverse-pasting operation is canceled.
To Next Page
Loading...
