YASKAWA DX100 - Registering Variable Name

3-82
155507-1CD
RE-CSO-A037
DX100
3 Teaching
3.9 Other Job-editing Functions
3.9.4.3 Registering Variable Name
1. Select {VARIABLE} under the main menu.
2. Select desired variable.
– Select any variable type from among byte type, integer type, double
precision integer type, real type, robot position type, base position
type, and station position type.
3. Move the cursor to desired variable number.
– If desired variable number is not displayed, move the cursor by
either of following operations.
• Select the variable number, input desired variable number and press
[ENTER]. The cursor moves to the variable number to be input.
• Move the cursor to the menu area and select {EDIT}{SEARCH}.
Input desired variable number and press [ENTER]. The cursor
moves to the variable number to be input.
4. Select “NAME”.
– The input buffer line appears.
5. Input name.
6. Press [ENTER].
– The variable name is registered.
SUPPLE-
MENT
Refer to section 1.2.6 “Character Input Operation” on page
1-18 for the character input operation.
165 of 554