YASKAWA DX100 - Function Enable Setting

6 Convenient Functions
6.9 Parameter Setting Function
6-104
155507-1CD
RE-CSO-A037
DX100
6.9.5 Function Enable Setting
Select {SETUP}  {FUNCTION ENABLE SETTING} to display the
following window.
• MASTER JOB CHANGE (S2C207)
Refer to section 8.3.0.9 “S2C207: MASTER JOB CHANGING
OPERATION” on page 8-14.
• RESERVED START (S2C222)
Refer to section 8.3.0.22 “S2C222: RESERVED START” on page 8-
18.
• RESERVED START JOB CHANGE (S2C209)
Refer to section 8.3.0.11 “S2C209: RESERVED WORK JOB
CHANGING OPERATION” on page 8-14.
Setting Parameter Status
Permit 0
Prohibit 1
Setting Parameter Status
Permit 0
Prohibit 1
Setting Parameter Status
Permit 0
Prohibit 1
344 of 554