YASKAWA DX100 - Displaying of Active Window and Non-Active Window; Limited Matters in Multi Window Mode

6-69
155507-1CD
RE-CSO-A037
DX100
6 Convenient Functions
6.7 Multi Window Function
6.7.3.3 Displaying of Active Window and Non-Active Window
When a display is in the multi window mode, one window should be active
and the rest is (are) non-active. The title of the active window is displayed
in deep blue and non-active window is in light blue.
The active window is the subject of key operation.
Also, the menu area or the operational buttons under the general-purpose
displaying area are displayed for the operation of the active window.
6.7.3.4 Limited Matters in Multi Window Mode
The content of window when it is in multi window mode can be different
from the same window when it is in single window mode because of its
limited size. The content becomes normal when the window is displayed
in the single window mode.
• The input buffer in the JOB window is displayed only when the
window is active.
• No auxiliary window appears.
309 of 554