YASKAWA DX100 - Modifying Job Names; Modifying Job Names on the JOB CONTENT Window

5-7
155507-1CD
RE-CSO-A037
DX100
5 Editing Jobs
5.3 Modifying Job Names
5.3 Modifying Job Names
This operation is used to modify the name of a job that is registered. The
operation can be performed in either the JOB CONTENT window or the
JOB LIST window.
5.3.0.1 Modifying Job Names on the JOB CONTENT Window
1. Select {JOB} under the main menu.
2. Select {JOB}.
– The JOB CONTENT window appears.
3. Select {JOB}  {RENAME JOB} under the pull-down menu.
4. Input the job name.
– Input the new job name.
– The name of the source job is displayed on the input area. It is
possible to partially change this name to enter a new name.
SUPPLE-
MENT
See section 1.2.6 “Character Input Operation” on page 1-18
for information on letter input operations.
233 of 554