YASKAWA DX100 - Deleting Jobs; Deleting Jobs on the JOB CONTENT Window

5-5
155507-1CD
RE-CSO-A037
DX100
5 Editing Jobs
5.2 Deleting Jobs
5.2 Deleting Jobs
This operation is used to delete jobs that are registered on the DX100. It
can be performed in either the JOB CONTENT window or the JOB LIST
window.
5.2.0.1 Deleting Jobs on the JOB CONTENT Window
On the JOB CONTENT window, the current edit job is deleted.
1. Select {JOB} under the main menu.
2. Select {JOB}.
– The JOB CONTENT window appears.
3. Select {JOB}  {DELETE JOB} under the pull-down menu.
4. Press “YES”.
– The confirmation dialog box appears.
– When “YES” is selected, the edit job is deleted. When deletion is
completed, the JOB LIST window appears.
– When “NO” is selected, the job deletion is canceled.
231 of 554