YASKAWA DX100 - Play Mode; S2 C210: Master or Submaster Call Operation in

8 Parameter
8.3 Mode Operation Setting Parameters
8-15
155507-1CD
RE-CSO-A037
DX100
8.3.0.12 S2C210: MASTER OR SUBMASTER CALL OPERATION IN PLAY
MODE
This parameter specifies whether the master or submaster call operation
in play mode is permitted or not. When the independent control function is
valid, the master job for sub-task is specified at the same time. The
specification can be done on the OPERATING CONDITION window.
0 : Permitted
1 : Prohibited
446 of 554