YASKAWA DX100 - Page 341

6-101
155507-1CD
RE-CSO-A037
DX100
6 Convenient Functions
6.9 Parameter Setting Function
• SECURITY MODE WHEN POWER ON (S2C195)
Refer to section 8.3.0.1 “S2C195: SECURITY MODE WHEN
CONTROL POWER SUPPLY IS TURNED ON” on page 8-12.
• JOB STEP WHEN POWER ON (S2C215)
Refer to section 8.3.0.15 “S2C215: ADDRESS SETTING WHEN
CONTROL POWER IS TURNED ON” on page 8-16.
• GENERAL OUT KEEP WHEN POWER ON (S2C235)
Refer to section 8.5.0.1 “S2C235: USER OUTPUT RELAY WHEN
CONTROL POWER IS ON” on page 8-40.
Setting Parameter Value
Operation
Mode
0
Editing Mode 1
Management
Mode
2
Setting Parameter Value
Power OFF 0
Initial 1
Setting Parameter Value
Power OFF 0
Initial 1
341 of 554