YASKAWA DX100 - Page 259

6-19
155507-1CD
RE-CSO-A037
DX100
6 Convenient Functions
6.3 Parallel Shift Function
• Adding the coordinate system in which the shift is performed
Move the cursor to the instruction in the input buffer line and press
[SELECT]. The DETAIL EDIT window appears.
– Line up the cursor with ”UNUSED” and press [SELECT]. The
selection dialog box appears. Line up the cursor with the coordinate
system to be added, and press [SELECT].
– After the coordinate system addition is completed, press [ENTER].
The DETAIL EDIT window closes and the JOB CONTENT window
appears.
6. Press [INSERT] and then [ENTER].
– The instruction displayed in the input buffer line is registered.
SFTON P001
0002 MOVL V=138
0003 SFTON P000 BF
0004 MOVL V=138
Line where SFTON
instruction is
registered.
259 of 554