6 Convenient Functions
6.5 PAM Function
6-52
155507-1CD
RE-CSO-A037
DX100
Cancelling the Execution
In the play mode, during the adjustment wait status, “STOP” is displayed
in the PAM window. To cancel the adjustment process, touch “STOP” on
the screen. Also, if the following occurs before executing, the process is
automatically cancelled.
• If the mode is changed
• If an alarm occurs
• If the power is turned OFF
Clearing Data
If there is a mistake made when adjusting the data, or if the adjustment of
the step becomes unnecessary, the data can be cleared.
1. Move the cursor to the step of the data to be cleared.
2. Select {EDIT} under the pull-down menu.
3. Select {LINE CLEAR}.
– The line data is cleared.
Steps in which
data is to be
cleared.
To Next Page
Loading...
