YASKAWA DX100 - Page 64

1 Introduction
1.4 Security Mode
1-36
155507-1CD
RE-CSO-A037
DX100
3. Select the desired security mode.
– When the selected security mode is higher than the currently set
mode, the user ID input status window appears.
4. Input the user ID as required.
– At the factory, the user ID number is preset as follows: 
Edit Mode: [00000000] 
Management Mode: [99999999]
5. Press [ENTER].
– The selected security mode’s input ID is checked. If the correct user
ID is input, the security mode is changed.
64 of 554