Logging and Network Management Command Set
Managing Switch Network Addresses
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 11-39
Syntax Description
Command Defaults
If no parameters are specified, all MAC addresses for the device will be displayed.
Command Mode
Read-Only.
Example
This example shows how to display MAC address information:
address mac
address
(Optional) Displays information for a specific MAC
address (if it is known by the device).
fid vlan_id (Optional) Displays MAC addresses for a specific filter
database identifier.
port port-string (Optional) Displays MAC addresses related to a specific
port(s). For a detailed description of possible port-string
values, refer to Section 4.1.2.
type (Optional) Displays information related to specific address
type. Valid types are:
• learned - Shows the network MAC addresses learned
by the device.
• self - Shows the device’s own MAC address.
• mgmt - Shows MAC addresses connected to the
management (host) ports.
Matrix>show mac
Filter Database Algorithm: mac-vid sequential
Current Filter Database Algorithm: mac-vid sequential
Aging Time : 300 seconds
Dynamic Address Counts : 20 Static Address Counts : 0
----------------------------------------------------------
MAC Address FID Port Type
----------------------------------------------------------
00-01-f4-d2-bc-80 10 host.0.1 self
00-00-1d-b1-16-14 10 fe.0.43 learned
00-00-1d-d4-78-aa 20 ge.2.1 learned
00-00-39-5e-f9-35 10 fe.0.14 learned
00-00-92-94-00-3a 10 fe.0.46 learned
00-00-c8-c8-00-97 20 ge.2.1 learned
00-01-f4-d2-bc-df 2 host.0.1 mgmt
00-01-f4-d2-bc-df 10 host.0.1 mgmt
To Next Page
Loading...