Logging and Network Management Command Set
Managing Switch Network Addresses
11-40 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Table 11-6 provides an explanation of the command output.
Table 11-6 show mac Output Details
Output What It Displays...
Filter Database
Algorithm
Default MAC algorithm mode.
Current Filter
Database
Algorithm
Current MAC algorithm mode, which is set with the set mac
algorithm command (Section 11.2.3.15).
Aging Time Time in seconds to age out inactive MAC address entries.
Set with the set mac agingtime command
(Section 11.2.3.10).
Dynamic Address
Counts
Number of dynamic MAC addresses in the routing table.
Static Address
Counts
Number of static MAC addresses in the routing table.
MAC Address MAC address designation.
FID Filter database identifier associated with the address.
Port Port designation associated with the address.
Type Whether or not the address belongs to the device (self), is a
learned address, or is connected to a management (host)
port.
To Next Page
Loading...
Need help?
General