Startup and General Configuration Summary
Factory Default Settings
3-4 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
QoS weight
round-robin (WRR)
Set to 25% for weighted queues (0 through 3).
RAD Enabled.
RADIUS client Disabled.
RADIUS last resort
action
When the client is enabled, set to Challenge.
RADIUS retries When the client is enabled, set to 3.
RADIUS timeout When the client is enabled, set to 20 seconds.
Rate limiting Disabled (globally and on all ports).
SNMP Enabled.
SNTP Disabled.
Spanning Tree Enabled (globally and on all ports).
Spanning Tree edge
port administrative
status
Disabled.
Spanning Tree edge
port delay
Enabled.
Spanning Tree forward
delay
Set to 15 seconds.
Spanning Tree hello
interval
Set to 2 seconds.
Spanning Tree ID
(SID)
Set to 1.
Spanning Tree legacy
path cost
Enabled.
Table 3-1 Default Device Settings for Basic and Switch Mode Operation (Continued)
Device Feature Default Setting
To Next Page
Loading...
Need help?
General