Startup and General Configuration Summary
Factory Default Settings
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 3-3
MAC authentication Disabled (globally and on all ports).
MAC locking Disabled (globally and on all ports).
MAC reauthentication Disabled on all ports. When enabled, reauthentication period and
quiet period are set to 30 seconds.
Passwords Set to an empty string for all default user accounts. User must press
ENTER at the password prompt to access CLI.
Password aging Disabled.
Password history No passwords are checked for duplication.
Port auto-negotiation Enabled on all ports.
Port advertised ability Enabled on all ports.
Port broadcast
suppression
Disabled (no broadcast limit).
Port duplex mode Set to half for 10BASE-T and 100BASE-TX; set to full for
1000BASE-X.
Port enable/disable Enabled.
Port priority Set to 1.
Port rate limiting Disabled.
Port speed Set to 10 mbps for 10BASE-T; 100 for 100BASE-TX; and 1000 for
1000BASE-X and 1000BASE-TX.
Port trap All port link traps are enabled.
Priority classification Classification rules are automatically enabled when created.
Priority classification
(802.1p) tag override
Disabled on all ports.
QoS hybrid Set to 25% for weighted queues (1 through 4).
Table 3-1 Default Device Settings for Basic and Switch Mode Operation (Continued)
Device Feature Default Setting
To Next Page
Loading...
Need help?
General