H3C S3600 Series Command Manual

1-6
7 1 1 0 2004-11-25 16:28:55.0
8 1 1 0 2004-11-25 16:28:55.0
9 1 1 0 2004-11-25 16:28:55.9
10 1 1 0 2004-11-25 16:28:55.9
Table 1-3 Description on the fields of the display hwping history command
Field Description
Response
Roundtrip time in the case of a successful test, timeout time in the
case of test timeout, or 0 in the case of a test failure (in
milliseconds)
Status
Test result values, including:
1: responseReceived: Response received
2: unknown: Unknown error.
3: internalError: System internal error
4: requestTimeOut: Request timed out
5: unknownDestinationAddress: Unknown destination address
6: noRouteToTarget: Destination unreachable
7: interfaceInactiveToTarget: Interface to destination address
inactive
8: arpFailure: ARP operation failed.
9: maxConcurrentLimitReached: Maximum limit of concurrent
accesses reached
10: unableToResolveDnsName: Unable to resolve DNS domain
name
11: invalidHostAddress: Invalid host address
LastRC
Response code in the last ICMP response packet received. (The
device does not support this field at present, so this field is always
displayed as 0.)
Time Test completion time
# Display the test results of the test group with administrator name administrator, and operation tag
http.
[Sysname-hwping-administrator-http] display hwping results administrator http
HWPing entry(admin dns, tag 1) test result:
Destination ip address:192.168.0.73
Send operation times: 1 Receive response times: 1
Min/Max/Average Round Trip Time: 27/27/27
Square-Sum of Round Trip Time: 729
Last succeeded test time: 2000-4-2 3:45:36.8
Extend result:
SD Maximal delay: 0 DS Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0 Operation timeout number: 0
System busy operation number: 0 Connection fail number: 0
Operation sequence errors: 0 Drop operation number: 0
Other operation errors: 0
Http result:
DNS Resolve Time: 0 HTTP Operation Time: 7

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English