H3C S3600 Series Command Manual

4-3
MSDP Peer 20.20.20.20, AS 100
Description:
Information about connection status:
State: Up
Up/down time: 14:41:08
Resets: 0
Connection interface: LoopBack0 (20.20.20.30)
Number of sent/received messages: 867/947
Number of discarded output messages: 0
Elapsed time since last connection or counters clear: 14:42:40
Information about (Source, Group)-based SA filtering policy:
Import policy: none
Export policy: none
Information about SA-Requests:
Policy to accept SA-Request messages: none
Sending SA-Requests status: disable
Minimum TTL to forward SA with encapsulated data: 0
SAs learned from this peer: 0, SA-cache maximum for the peer: none
Input queue size: 0, Output queue size: 0
Counters for MSDP message:
Count of RPF check failure: 0
Incoming/outgoing SA messages: 0/0
Incoming/outgoing SA requests: 0/0
Incoming/outgoing SA responses: 0/0
Incoming/outgoing data packets: 0/0
Table 4-2 display msdp peer-status command output description
Field Description
MSDP Peer MSDP peer address
AS
Number of the AS where the MSDP peer is located. “?”
indicates that the system was unable to obtain the AS
number
State
MSDP peer status:
z Up: Session set up; MSDP peer in session
z Listen: Session set up; local device as server, in
listening state
z Connect: Session not set up; local device as client, in
connecting state
z Shutdown: Deactivated
z Down: Connection failed
Resets Number of times the MSDP peer connection is reset
Up/Down time
Time passed since MSDP peer connection
establishment/failure
Connection interface
Interface and its IP address used for setting up a TCP
connection with the remote MSDP peer
Number of sent/received messages
Number of SA messages sent and received through this
connection
Number of discarded output messages Number of discarded outgoing messages

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English