H3C S3600 Series Command Manual

1-11
View
Any view
Parameters
isp-name: Name of an ISP domain, a string of up to 128 characters. This must be the name of an
existing ISP domain.
Description
Use the display domain command to display configuration information about one specific or all ISP
domains.
Related commands: access-limit, domain, scheme, state.
Examples
# Display configuration information about all ISP domains.
<Sysname> display domain
0 Domain = system
State = Active
Scheme = LOCAL
Access-limit = 512
Vlan-assignment-mode = Integer
Domain User Template:
Idle-cut = = Enable Time = 60(min) Flow = 200(byte)
Self-service URL = http://aabbcc.net
Messenger Time Maxlimit = 30(min) span = 10(min)
Default Domain Name: system
Total 1 domain(s).1 listed.
Table 1-2 Description on the fields of the display domain command
Field Description
Domain Domain name
State
Status of the domain, which can be active or
block.
Scheme AAA scheme that the domain uses
Access-Limit
Maximum number of local user connections in
the domain
Vlan-assignment-mode
VLAN assignment mode, which can be Integer or
String.
Domain User Template
Domain user template settings, that is, attribute
settings for all users in the domain.
Idle-Cut Status of the idle-cut function
Self-service URL Self-service URL for password changing

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English