2-2
If interface Vlan-interface vlan-id is specified, proxy ARP configuration of the specified VLAN interface
is displayed; otherwise, proxy ARP configuration of all the VLAN interfaces is displayed.
Related commands: arp proxy enable.
Examples
# Display the proxy ARP status on all VLAN interfaces.
<Sysname> display arp proxy
Interface Vlan-interface1
Proxy ARP status: enabled
Interface Vlan-interface2
Proxy ARP status: enabled
Interface Vlan-interface3
Proxy ARP status: disabled
# Display the proxy ARP status on VLAN-interface 2.
<Sysname> display arp proxy interface Vlan-interface 2
Interface Vlan-interface2
Proxy ARP status: enabled
Table 2-1 Description on the fields of the display arp proxy command
Field Description
Interface VLAN interface name
Proxy ARP status Proxy ARP status: enabled/disabled
To Next Page
Loading...
