H3C S3600 Series Command Manual

5-4
ip address bootp-alloc
Syntax
ip address bootp-alloc
undo ip address bootp-alloc
View
VLAN interface view
Parameters
None
Description
Use the ip address bootp-alloc command to configure a VLAN interface to obtain an IP address
through BOOTP.
Use the undo ip address bootp-alloc command to cancel the configuration.
By default, a VLAN interface does not use BOOTP to obtain an IP address.
Related commands: display bootp client.
Examples
# Configure VLAN-interface 1 to obtain an IP address through BOOTP.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Vlan-interface 1
[Sysname-Vlan-interface1] ip address bootp-alloc

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English