1-5
Inbound:
Matches: Acl 2000 rule 0 running
6 packets inprofile
0 packet outprofile
Ethernet1/0/1: mirrored-to
Inbound:
Matches: Acl 2000 rule 0 running
Mirrored to: monitor interface
Ethernet1/0/1: line-rate
Inbound: 64 Kbps
Burst bucket size: 16 Kbyte
Ethernet1/0/1:
Queue scheduling mode: weighted round robin
weight of queue 0: 1
weight of queue 1: 2
weight of queue 2: 3
weight of queue 3: 4
weight of queue 4: 5
weight of queue 5: 9
weight of queue 6: 13
weight of queue 7: 15
Ethernet1/0/1: traffic-remark-vlanid
Inbound:
Matches: Acl 2000 rule 0 running
Remark vlan: 2
Table 1-3 Description on the fields of the display qos-interface all command
Field Description
Ethernet1/0/1
QoS functions configured on a port, including
z traffic-limit, traffic policing configuration
z traffic-priority, priority marking configuration
z traffic-redirect, traffic redirecting configuration
z traffic-statistic, traffic accounting configuration
z mirrored-to, traffic mirroring configuration
z line-rate, port speed limit configuration
z traffic-remark-vlanid, VLAN mapping configuration
Inbound Packet direction
Matches ACL rules for traffic classifying
Effect mode
Union effect, indicating that the ACL referenced in the traffic-limit
command takes effect together with the other ACLs applied to the
port.
Egress port The specified egress port
Target rate Traffic policing target rate, in kbps
Bucket burst size Maximum burst traffic size allowed, in KB
To Next Page
Loading...
Need help?
General