1-46
Description
Use the topology restore-from command to restore the standard topology of the cluster from the Flash
memory of the administrative device when errors occur to the topology, and advertise the topology to
the member devices of the cluster to ensure normal operation of the cluster.
You can only use this command on the cluster administrative device.
Related commands: topology accept, topology save-to.
Examples
# Restore the base cluster topology from the flash of the management device in the cluster.
<aaa_0.Sysname> system-view
Enter system view, return to user view with Ctrl+Z.
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] topology restore-from local-flash
topology save-to
Syntax
topology save-to local-flash
View
Cluster view
Parameters
None
Description
Use the topology save-to command to save the standard topology of the cluster to the local Flash
memory.
The file name used to save the standard topology is topology.top. Do not modify the file name.
This command is applicable to only the management device of a cluster.
Related commands: topology restore-from.
Examples
# Enter Cluster view.
To Next Page
Loading...
Need help?
General