H3C S3600 Series

1-37
ssh-server source-ip
Syntax
ssh-server source-ip ip-address
undo ssh-server source-ip
View
System view
Parameters
ip-address: IP address to be set as the source IP address.
Description
Use the ssh-server source-ip command to specify a source IP address for the SSH server. If the
specified IP address is not an IP address of the device, the command fails.
Use the undo ssh-server source-ip command to cancel the source IP address setting. Then, a local
device address determined by the system can be used by users to access the switch.
Examples
# Specify source IP address 192.168.0.1 for the SSH server.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ssh-server source-ip 192.168.0.1