KLA Tencor P-16+ - S Ecurity G Roups

System Security - Security Groups KLA-Tencor P-16+ / P-6 User’s Guide
11-20 KLA-Tencor Confidential 0142530-000 AB
3/13/09
y
SECURITY GROUPS 11
The computer is configured with a set of default Windows XP and Profiler software
security groups. The administrator can create new user accounts that provide users
access to these groups. The security groups and procedure to create new users is
described in more detail below.
Windows XP defined groups functions as follows:
 Administrator and Power Users: A user who is a member of either of
these predefined groups has all of the Profiler privileges. That is, he is
allowed to use any and all Profiler software features and can create, delete,
or modify any Profiler system or data files.
 User: A user who is a member of predefined Users group has the basic set
of Profiler privileges:
 View a scan or sequence recipe
 Run a scan or sequence recipe
 Save the data in a new data file
 View data
 Perform the Applied Force calibration
The Profiler defined groups have privileges as follows:
 P_Configuration: Gives the user the rights to view and modify all
configuration settings, except advanced configuration settings: Theta Soft
Home Position, Manual Load Position, and the elevator approach speeds.
 P_AdvConfiguration: Gives the user the rights to view and modify all
configuration settings.
 P_Calibration: Gives the user the rights to view and modify all
calibration settings, except advanced calibration settings: Linearity,
Stagemapping, and Center of Rotation.
 P_AdvCalibration: Gives the user the rights to view and modify all
calibration settings.
 P_AppliedForce: Gives the user the rights to perform the applied foce
calibration.
 P_RecipesData: Give the user the rights to create and modify recipes and
data, for scans and seqeunces. It also provides full access to the import and
export functionality of recipes and data.
 P_XYView: Gives the user rights to access the XY View application.
 P_GEMSECS: Gives the user rights to modify all GEM/SECS settings.
 P_Stress: Gives the user rights to create and modify stress recipes and
data.
 P_DefectReview: Gives the user rights to use the Defect Review
application.