KLA Tencor P-16+ - Figure A.1 Hazardous Content Symbol; Table A.1 Hazardous Materials List

Hazardous Materials Hazardous Materials List KLA-Tencor P-16+ / P-6User’s Guide
A-2 KLA-Tencor Confidential 0142530-000 AB
3/13/09
For equipment at the end of life in the European Union, KLA-Tencor works with local
recyclers to ensure that equipment is properly disposed. Contact KLA-Tencor
regarding the disposal of equipment in the EU when you see the following symbol:
HAZARDOUS MATERIALS LIST 1
The following provides a more detailed list of where hazardous materials may be
found. These components, if used in the equipment, shall be separated and disposed
of properly.
Figure A.1 Hazardous Content Symbol
Table A.1 Hazardous Materials List
Material Used In
Lead (Pb) PCBA
Electronic Component
Solder
Component lead finish
Die attach
Ceramic packages
internal filp chip balls
BGA balls
Cable/Wire insulation, jacketing
Rubber hardner, pigment, paint,
lubricated
Metal allo
Connectors
Fuses
Circuit Breakers
Motors & Encoders
Fans
Flex circuits