KLA Tencor P-16+ - Figure 16.2 Profiler Backup Command

Backup and Restore - KLA-Tencor P-16+ / P-6 User’s Guide
16-2 KLA-Tencor Confidential 0241110-000 AB
3/13/09
b. Destination drive can be any of the following: local hard drive, CD
RW drive, DVD RW drive, USB drive or any mapped network
drive.
c. The following will be automatically backed up: configuration,
calibrations, system registry, EPROM, scan recipes, and sequence
recipes.
d. Adding data (optional) to the command will include scan and
sequence data in the backup..
NOTE: To receive instructions for the backup or restore procedures,
type pbackup or prestore in the command prompt window. This will
display instructions for the backup or restore procedure.
Figure 16.2 Profiler Backup Command