Rohde & Schwarz SMW200A - Page 172

Signal Routing and System Configuration
R&S
®
SMW200A
157User Manual 1175.6632.02 ─ 16
Select Instrument
Lists all available instruments, found by the Detect/Scan function.
To connect an external instrument, use one of the following:
●
Enable "Select Instrument > New" and configure the settings manually
●
Select "Select Instrument", navigate trough the pool of available instruments, and
select the required. The required settings are retrieved and updated automatically.
Select "None" to disable the connection.
Execute "Apply" to confirm the settings.
Remote command:
:SCONfiguration:EXTernal:REMote:LIST? on page 850
:SCONfiguration:EXTernal:REMote:ADD on page 850
:SCONfiguration:EXTernal:CODer<ch>:REMote:ISELect on page 851
:SCONfiguration:EXTernal:FADer<ch>:REMote:ISELect on page 851
:SCONfiguration:EXTernal:BBMM<ch>:REMote:ISELect on page 851
:SCONfiguration:EXTernal:IQOutput<ch>:REMote:ISELect on page 851
Symbolic Name
Sets the alias name of the instrument.
Remote command:
:SCONfiguration:EXTernal:REMote:ADD on page 850
:SCONfiguration:EXTernal:CODer<ch>:REMote:INFO? on page 852
:SCONfiguration:EXTernal:FADer<ch>:REMote:INFO? on page 852
:SCONfiguration:EXTernal:BBMM<ch>:REMote:INFO? on page 852
:SCONfiguration:EXTernal:IQOutput<ch>:REMote:INFO? on page 852
Hardware Channel
Selects the hardware channel (USB or LAN) used by the remote channel to the exter-
nal instrument.
Remote command:
:SCONfiguration:EXTernal:REMote:ADD on page 850
:SCONfiguration:EXTernal:CODer<ch>:REMote:INFO? on page 852
:SCONfiguration:EXTernal:FADer<ch>:REMote:INFO? on page 852
:SCONfiguration:EXTernal:BBMM<ch>:REMote:INFO? on page 852
:SCONfiguration:EXTernal:IQOutput<ch>:REMote:INFO? on page 852
Name / IP Address
Displays/sets the IP address or hostname of the connected external instrument.
Remote command:
:SCONfiguration:EXTernal:REMote:ADD on page 850
:SCONfiguration:EXTernal:CODer<ch>:REMote:INFO? on page 852
:SCONfiguration:EXTernal:FADer<ch>:REMote:INFO? on page 852
:SCONfiguration:EXTernal:BBMM<ch>:REMote:INFO? on page 852
:SCONfiguration:EXTernal:IQOutput<ch>:REMote:INFO? on page 852
RF Path
In a two-path instrument, determines the RF output to be used.
System Configuration Settings