Remote Control Commands
R&S
®
SMW200A
850User Manual 1175.6632.02 ─ 16
:SCONfiguration:EXTernal:REMote:LIST?
Lists all available instruments, found by the :SCONfiguration:EXTernal:REMote:
SCAN command.
Return values:
<InstrNames> String
String with symbolic names and/or alias names
Example: see Example "Connecting and configuring external instrument
(advanced configuration)" on page 826
Usage: Query only
Manual operation: See "Select Instrument" on page 157
:SCONfiguration:EXTernal:REMote:ADD
<InstrName>, <HwChan>,
<TcpIporUsbAddr>[, <RfPathNumber>]
Adds manually an external instrument to the list of available instruments.
Parameters:
<HwChan> String
Hardware channel (USB or LAN) used by the remote channel to
the external instrument
Range: "LAN" to "USB"
*RST: "LAN"
<TcpIporUsbAddr> String
IP address or hostname of the connected external instrument
<RfPathNumber> String
Determines the number of RF paths the external instrument is
equipped with
Range: "1" to "2"
*RST: "1"
Setting parameters:
<InstrName> String
Alias name of the instrument
Example: See Example "Connecting and configuring external instrument
(advanced configuration)" on page 826
Usage: Setting only
Manual operation: See "Select Instrument" on page 157
:SCONfiguration:EXTernal:REMote:REName
Changes the symbolic name of the instrument.
SCONfiguration Subsystem
To Next Page
Loading...
