TP-Link T2600G Series - Page 1001

User Guide 972
Configuring sFlow (Only for Certain Devices) Configuration Example
Switch(config)# sflow collector collector-ID 1 port 6343
3) Configure the sFlow sampler.
Switch(config)#interface gigabitEthernet 1/0/1
Switch(config-if)#sflow sampler collector-ID 1
Switch(config-if)#sflow sampler ingRate 1024
Switch(config-if)#end
Switch#copy running-config startup-config
Verify the Configurations
Verify the configuration of global sFlow:
Switch#show sflow global
sFlow Status: Enable
Agent Address: 192.168.0.26
sFlow Version: v5
Verify the configuration of sFlow collector:
Switch#show sflow collector
Collector Col-IP Col-Port MaxData Timeout Lifetime Description
-------- -------------- -------- -------- -------- -------- -----------
1 192.168.0.27 6343 300 0 0
2 0.0.0.0 6343 300 0 0
3 0.0.0.0 6343 300 0 0
4 0.0.0.0 6343 300 0 0
Verify the configuration of sFlow sampler:
Switch#show sflow sampler
Port Collector IngRate EgRate MaxHeader LAG
---------- ---------- ---------- ---------- ---------- ---
Gi1/0/1 1 1024 0 128 N/A
Gi1/0/2 0 0 0 128 N/A
...