TP-Link T2600G Series - Creating an SNMP View

SNMP Configurations
User Guide
1033
0 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
0 Number of requested variables
0 Number of altered variables
0 Get-request PDUs
0 Get-next PDUs
0 Set-request PDUs
0 SNMP packets output
0 Too big errors (Maximum packet size 1500)
0 No such name errors
0 Bad value errors
0 General errors
0 Response PDUs
0 Trap PDUs
Switch(config)#show snmp-server engineID
Local engine ID: 80002e5703000aeb13a23d
Remote engine ID: 123456789a
Switch(config)#end
Switch#copy running-config startup-config
2.2.2 Creating an SNMP View
Specify the OID (Object Identifier) of the view to determine objects to be managed.
Step 1 configure
Enter Global Configuration Mode.