TP-Link T2600G Series - Access Security Configurations; Using the GUI; Configuring the Access Control Feature

User Guide 696
Configuring Access Security Access Security Configurations
2
Access Security Configurations
With access security configurations, you can:
■ Configure the Access Control feature
■ Configure the HTTP feature
■ Configure the HTTPS feature
■ Configure the SSH feature
■ Configure the Telnet function
■ Configure the Serial Port parameters
2.1 Using the GUI
2.1.1 Configuring the Access Control Feature
Choose the menu SECURITY > Access Security > Access Control to load the following
page.
Figure 2-1 Configuring the Access Control
1) In the Global Config section, enable Access Control, select one control mode and click
Apply.